longitudinal support beam for MS-III shelves depth channel
price net, excl. VAT · delivery time from 3 days
≈ €8.18 incl. 19 % VAT · plus freight approx. 49–120 €
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
The Längsunterzug is a longitudinal support beam that braces the MS-III shelf panels with closed depth channel from below. It runs across several cantilever arms along the rack front and carries the panel load so the level does not deflect even over longer spans.
This component weighs 0.93 kg, galvanized finish.
Applications: Cantilever rack · MS-III shelves · Depth-channel shelves · Long-goods storage · Level reinforcement · Depot yard
Additional shelf support. The support beam introduces an additional support line beneath the MS-III shelves and distributes the load instead of leaving it to the cantilever arm ends alone.
Fits the depth channel. Specially designed for MS-III shelves with a closed depth channel: the profile engages flush into the channel, so that shelf and support beam close level with each other.
Higher shelf load, less deflection. The continuous longitudinal support allows longer levels with a stable bearing to be realized without the shelves sagging in the middle.
Two lengths, two finishes. Available in lengths 1000 and 1300, galvanized or powder-coated in RAL 7035 light grey to match the rest of the rack assembly.
The longitudinal support beam is laid lengthwise beneath the shelves onto the cantilever arms and forms a continuous support line across several arms. As an original META component, it is dimensionally matched exactly to the MS-III shelf system with a closed depth channel.
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 178588 |
|---|---|
| EAN | 4026212291391 |
| Category | Cantilever racking |
| Finish | Galvanised |
| Delivery time | from 3 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
Further cantilever racking
clip-on bracket with Platte 400 mm for MULTIPAL
META MULTISTRONG KR floor anchor set
KR roll-off pin 20 x 3 x 200 with deflector for MULTISTRONG cantilever arms
