CLIP 150 Modul shelves solid wall
price net, excl. VAT · delivery time from 10 days
≈ €859.47 incl. 19 % VAT · plus freight approx. 49–120 €
Starter bay = free-standing, can be used on its own · Add-on bay = extension bay, can only be attached to an existing starter bay.
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
The CLIP 150 module with solid side frames is a fully enclosed cabinet unit built on META's tool-free CLIP plug-in shelving: closed solid side frames, a back panel and hinged doors turn the clipped-in shelves into a lockable, dust-protected storage cabinet. Your stored goods are fully concealed and secured against access, without giving up the tool-free CLIP assembly.
This starter bay version measures 2,000 × 1,000 × 500 mm and carries 6 shelves rated at 150 kg each; RAL 7035 light grey finish, bay load up to 820 kg.
Applications: Workshop cabinet · Archive · Locked storage · Operating supplies · Sales area · Office
Enclosed, secured body. Solid side frames and the back panel close the rack tightly at the sides and rear, while the hinged door secures the front, keeping the contents dust-free and protected against unauthorised access.
CLIP shelves inside. Inside it uses the proven CLIP shelves, hooked in without tools and fixed via the anti-dislodge safety; shelf heights can be repositioned within the pitch later on.
Available as a starter or add-on bay. Available as a starter rack (GR) and as an add-on rack (AR): you economically line up several cabinet modules into a closed cabinet wall, since adjacent modules share a side frame.
Full or half door selectable. Alongside the continuous 2-metre full door there are versions with a half-height door in the lower section, combining lockable, enclosed storage below with openly accessible shelves above.
Offered as a complete cabinet module in several depths and with 5 or 6 shelves, optionally with a full door, a half-height hinged door at the bottom or two hinged doors of 1 metre each. The closed structure of solid wall side frames, back panel and door can be assembled as a starter and add-on rack into a continuous cabinet front.
Guide: choosing the right shelf racking – system, dimensions and load capacity
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 267907 |
|---|---|
| EAN | 4026212088489 |
| System | META CLIP |
| Category | Shelving units |
| Version | starter bay |
| Dimensions (H×W×D) | 2000 × 1000 × 500 mm |
| Shelves | 6 |
| Shelf load per shelf | 150 kg |
| bay load (max.) | 820 kg |
| Finish | RAL 7035 light grey |
| Delivery time | from 10 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
Further shelving units
META CLIP wire basket shelving unit light wire baskets
order-staging rack compartment
S3 150 CLIP hazardous-goods rack with mesh grating shelves + spill tray
