META MULTISTRONG KR IPE140 double-sided cantilever arms
price net, excl. VAT · delivery time from 3 days
≈ €1,381.32 incl. 19 % VAT · plus freight approx. 49–120 €
Starter bay = free-standing, can be used on its own · Add-on bay = extension bay, can only be attached to an existing starter bay.
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
This cantilever rack of the KR IPE140 double-sided series is a heavy-duty cantilever rack from the META MULTISTRONG system that cantilevers to both sides: the arms are mounted on both faces of the uprights, letting you load and retrieve long goods from either side and use both flanks of the rack in full. The upright is a hot-rolled IPE140 I-beam ("medium duty"), which carries heavy, bulky goods over the full height without any obstructing front columns.
This version measures 2,000 × 1,000 × 400 mm with 4 arm levels rated at 535 kg per level, bay load up to 5,760 kg; RAL 5010 gentian blue finish.
Applications: Long goods · Profiles & tubes · Boards & timber · Round steel · Two-sided storage · Free-standing rack row
Accessible from both sides. Cantilever arms on both sides of the upright double the storage area per footprint and make the rack line usable freestanding in the room or back-to-back.
IPE140 uprights for heavy loads. The hot-rolled I-beam upright (medium-duty system) absorbs high bay and arm loads and stays dimensionally stable even with long, projecting arms.
Open front without columns. The front-upright-free design lets long and bulky goods be pushed in lengthwise unhindered, by forklift or crane, without obstructing front frames.
Arms plugged in level by level. The arms are hooked into the upright and can be height-adjusted within the grid, so that you can adapt the level heights to stored goods of different heights.
Available as a starter rack (with double-sided uprights) and as an add-on rack for lining up against an existing line, each with 8 or 10 cantilever arms per upright. The IPE140 uprights are anchored to the floor; the double-sided arrangement is particularly suited to rack lines standing freely in the room and accessible from both aisles.
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 275117 |
|---|---|
| EAN | 4026212120134 |
| System | META MULTISTRONG |
| Category | Cantilever racking |
| Version | starter bay |
| Dimensions (H×W×D) | 2000 × 1000 × 400 mm |
| Arm levels | 8 |
| load capacity per arm level | 535 kg |
| Finish | RAL 5010 gentian blue |
| Delivery time | from 3 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
