CLIP 150 Modul shelves
price net, excl. VAT · delivery time from 10 days
≈ €1,910.34 incl. 19 % VAT · plus freight approx. 49–120 €
Starter bay = free-standing, can be used on its own · Add-on bay = extension bay, can only be attached to an existing starter bay.
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
The CLIP 150 module is a complete cabinet unit built on the tool-free CLIP plug-in system: it combines open shelf boards in the upper section with a built-in drawer bank below (three drawers each at 150 and 200 mm height). This pairs the visibility of open shelving with orderly, low-dust access to small parts stored in pull-out drawers, all at a single workstation.
This starter bay version measures 2,000 × 1,000 × 500 mm and carries 3 shelves rated at 150 kg each; RAL 7035 light grey finish, bay load up to 820 kg.
Applications: Workshop · Workstation · Small parts storage · Spare parts storage · Assembly · Industrial fit-out
Shelf boards and drawers in one unit. Bulky, frequently handled goods sit openly on the shelf boards, while sensitive small parts and spares are kept in the drawers below, all in a single module.
Tool-free CLIP plug-in assembly. Shelves and longitudinal rails are hooked into the upright frames without screws and fixed by the lift-out guard. Level heights can be adjusted later without tools.
Available as a starter or add-on bay. Available as a starter bay (own frames, three boards) or space-saving add-on bay (shares the neighbouring frame, two boards), so several modules line up into a continuous cabinet run.
Pull-out drawers. The drawer bank with compartments in two heights ensures sorted storage of tools, standard and spare parts with quick access from the front.
The module measures 2000 x 1000 x 500 mm in RAL 7035 light grey and comes as a starter bay (three shelf boards) or add-on bay (two shelf boards), each with an integrated drawer block of three drawers at 150 and 200 mm height. The open boards stay height-adjustable via the CLIP plug-in pitch.
Guide: choosing the right shelf racking – system, dimensions and load capacity
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 298994 |
|---|---|
| EAN | 4026212281378 |
| System | META CLIP |
| Category | Shelving units |
| Version | starter bay |
| Dimensions (H×W×D) | 2000 × 1000 × 500 mm |
| Shelves | 3 |
| Shelf load per shelf | 150 kg |
| bay load (max.) | 820 kg |
| Finish | RAL 7035 light grey |
| Delivery time | from 10 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
