CLIP Modul shelves 2 Schub
price net, excl. VAT · delivery time from 10 days
≈ €1,697.42 incl. 19 % VAT · plus freight approx. 49–120 €
Starter bay = free-standing, can be used on its own · Add-on bay = extension bay, can only be attached to an existing starter bay.
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
The CLIP Modul Fachböden 2 Schub is a fully pre-configured cabinet module based on the tool-free META CLIP boltless shelving: within a single bay it combines four open shelves in the upper section with a drawer block of five pull-outs (two shallow and three deeper drawers) in the lower section. This lets you merge freely accessible shelf storage with organised, enclosed drawer storage for small parts in one shelving unit.
This starter bay version measures 2,000 × 1,000 × 500 mm at 150 kg per shelf, RAL 7035 light grey finish.
Applications: Workshop · Small-parts store · Tool crib · Assembly workstation · Spare-parts store · Industrial furnishing
Shelving and drawers in one module. At the top you store bulky or frequently removed goods openly on the shelves, at the bottom tools, small parts and accessories disappear neatly and dust-protected into the drawers - all in one bay.
Staggered drawer heights. The pull-out block combines flat drawers (100 mm) for small parts and flat tools with taller drawers (200 mm) for more voluminous material - this lets you use the storage space precisely.
Tool-free CLIP construction. The shelves are hooked into the upright frames without screws and secured against accidental lift-out by the lift-off guard; the shelf heights can later be repositioned within the grid.
Available as a starter or add-on bay. Available as a standalone starter rack or as an add-on rack that shares a common row of uprights with the adjacent bay - allowing you to line up multiple modules in a material- and space-saving way.
The module is delivered complete with four shelves and five drawers (two shallow, three tall) in the format 2000 × 1000 × 500 mm, surface RAL 7035 light grey. As an add-on rack it uses an existing row of uprights of the adjacent starter rack and thus saves one frame side.
Guide: choosing the right shelf racking – system, dimensions and load capacity
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 298996 |
|---|---|
| EAN | 4026212281392 |
| System | META CLIP |
| Category | Shelving units |
| Version | starter bay |
| Dimensions (H×W×D) | 2000 × 1000 × 500 mm |
| storage levels | 4 |
| Shelf load per shelf | 150 kg |
| bay load (max.) | 820 kg |
| Finish | RAL 7035 light grey |
| Delivery time | from 10 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
