shim plate 1 5 for KR-foot parts Multistrong L + M
price net, excl. VAT · delivery time from 3 days
≈ €0.57 incl. 19 % VAT · plus freight approx. 49–120 €
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
The 1.5 mm shim plate (Unterlegblech) is a galvanized leveling shim that slides underneath the base plates (KR foot parts) of the MULTISTRONG L/M cantilever columns. It compensates for floor unevenness beneath the column foot so the cantilever upright stands plumb and true and transfers its load cleanly into the floor.
This component weighs 0.08 kg, galvanized finish.
Applications: Floor levelling · levelling the upright foot · KR foot parts · MULTISTRONG L + M · cantilever rack assembly · uneven hall floor
Levels the upright foot. Shims individual foot parts millimetre by millimetre, so that the cantilever upright stands vertically and without stress even on a slightly uneven hall floor.
Slotted for the anchor bolt. The U-shaped recess encloses the floor anchor bolt, so that the plate can be pushed under the anchored foot part in a targeted manner and also retrospectively.
Stackable for any joint height. Thin 1.5 mm plate that can be stacked in multiple layers to build up the required height compensation precisely.
Galvanized, genuine META. Corrosion-protected galvanized and precisely matched to the KR foot parts of MULTISTRONG L + M.
Flat, galvanized shim plate with a U-shaped slot that is placed under the foot parts of the cantilever uprights during installation and alignment. If required, several plates are stacked until the upright foot rests fully and stands plumb.
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 274833 |
|---|---|
| EAN | 4026212117714 |
| System | META MULTISTRONG |
| Category | Cantilever racking |
| Finish | Galvanised |
| weight | 0.08 kg |
| Delivery time | from 3 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
Further cantilever racking
META MULTISTRONG H Keilscheiben 13 5 DIN
META MULTISTRONG KR roll-off pin mount for foot section, compl.
META MULTISTRONG H shim plate for IPE160-IPE200 90 1
