MULTIPAL 490kg storage level
price net, excl. VAT · delivery time from 3 days
≈ €543.27 incl. 19 % VAT · plus freight approx. 49–120 €
Starter bay = free-standing, can be used on its own · Add-on bay = extension bay, can only be attached to an existing starter bay.
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
These MULTIPAL pallet racking bays are fully pre-configured units supplied with 3 or 4 ready-planned storage levels (Lagerebenen): the load beams are already hooked into the perforated upright frames and locked with a safety pin, so the bay is ready to be loaded with Euro pallets or mesh box pallets. They are available either as a starter bay (Grundregal, free-standing with two upright frames) or as an add-on bay (Anbauregal) that is lined up against an existing bay and shares its middle upright frame with the neighbouring bay.
This version measures 2,700 × 2,700 × 1,100 mm at a bay load up to 2,960 kg, RAL 2001 red orange finish.
Applications: Pallet storage · Euro pallets · Mesh boxes · Logistics · Production · Wholesale
Ready-planned levels. The bay ships with a defined number of levels (3 or 4 storage levels) and matching load beams; beams and frames arrive already matched.
Starter or add-on bay. As a starter rack, you begin a rack line independently; each further add-on rack shares the existing upright frame of the neighboring bay and thus saves material when extending the line.
Clip and hook-in system. The load beams are hooked into the grid perforation of the upright frame with minimal tooling and locked with a safety pin – level heights remain adjustable within the grid afterwards.
For pallets and mesh boxes. Designed to hold Euro pallets and mesh box pallets across two load beams per compartment – classic heavy-duty pallet storage.
Each bay consists of the upright frames and the hooked-in load beams; the starter rack comes with both frames, the add-on rack with only the one additional frame for lining up. The level heights can be freely divided via the grid perforation of the frames, so the bay can be adapted to different pallet heights.
Guide: planning a pallet rack – basics and dimensions
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 293197 |
|---|---|
| EAN | 4026212248722 |
| System | META MULTIPAL |
| Category | Pallet racking |
| Version | starter bay |
| Dimensions (H×W×D) | 2700 × 2700 × 1100 mm |
| load capacity per support level | 1,480 kg |
| Finish | RAL 2001 red orange |
| Delivery time | from 3 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
