Befestigungsset rear mesh panel LA Heavy MULTIPAL
price net, excl. VAT · delivery time from 3 days
≈ €19.09 incl. 19 % VAT · plus freight approx. 49–120 €
We make this variant to order – we will prepare an individual quote for you at short notice.
Product description
The LA Heavy back-mesh mounting set is the fastening kit used to fix a HEAVY back-mesh grille to the MULTIPAL upright frame. It provides the matching brackets and fixings to anchor the grille securely and without slippage to the rear of the rack – one set per grille.
This component weighs 1.47 kg, galvanized finish.
Applications: Back panel grille · push-through guard · MULTIPAL pallet rack · upright fastening · load securing
Complete per grille. The set contains all the small parts needed to fasten one back-mesh grille, including the brackets and fixings. One set is required per grille.
For the Heavy version. Designed for the heavier back panel grille variant of the MULTIPAL range, so that the anchoring remains load-bearing even with the large-format HEAVY grilles.
Two clear spacings (LA 100 / LA 175). Available for a 100 mm or 175 mm clear gap between the upright profile and the back-mesh grille. The 175 mm variant is intended for combination with an LA 100 rack-through protection bar.
Secures against rack-through. A firmly anchored back panel grille prevents pallets or loads from being pushed through to the rear into the adjacent aisle or work area – in accordance with DGUV Information 208-061 on securing traffic routes and work areas.
The set is bolted directly to the perforated MULTIPAL upright frame and is available as a galvanized version in two clear-spacing variants: LA 100 (100 mm) and LA 175 (175 mm, for combination with a push-through guard LA 100). The clear spacing refers to the distance between the upright profile and the back panel grille, not the hole pattern – both variants fit the same MULTIPAL frame.
Guide: planning a pallet rack – basics and dimensions
Manufacturer & product safety
Responsible manufacturer within the meaning of the EU General Product Safety Regulation (EU) 2023/988:
META-Regalbau GmbH & Co. KGEichenkamp 5
59759 Arnsberg, Germany
E-Mail: info@meta-online.com
Please observe the safety and assembly instructions before installation and use (see the safety instructions PDF above). Racking installations are structurally verified; the stated shelf and bay loads are based on evenly distributed loads and on correct, complete assembly in accordance with the manufacturer's specifications, and must not be exceeded.
Technical data
| Item number (SAP) | 305177 |
|---|---|
| EAN | 4026212389753 |
| System | META MULTIPAL |
| Category | Pallet racking |
| Finish | Galvanised |
| Delivery time | from 3 days |
| Manufacturer | META (original) |
Load values are nominal loads based on evenly distributed loads. The permissible shelf and bay loads must not be exceeded.
